Get in Touch Hoffman Estates!
Book a chimney sweep or inspection in Hoffman Estates by calling 847-994-4388, emailing [email protected], or sending the form below. If you know whether your fireplace is masonry or factory-built, include it — the visits are different.
Hoffman Estates grew from farmland in the mid-1950s, when F&S Construction began building the first subdivisions, and the village incorporated in 1959. Building continued west and north for the next four decades, so a ranch from the late 1950s and a two-story from the 1990s can be a short drive apart. We serve Hoffman Estates from our shop in Buffalo Grove.
Contact Info
We’re here to assist you during our office hours from Monday to Friday, 8am – 5pm. Feel free to call us at 847-994-4388 for any chimney-related inquiries or assistance you may need. Your safety and satisfaction are important to us!
Chimney Sweep in Hoffman Estates: Two Generations of Fireplace
Our job-photo records hold 37 documented Hoffman Estates projects, and they split into two groups:
- The original subdivisions, with brick chimneys serving a masonry fireplace and, often, a furnace and water heater flue alongside it.
- Newer neighborhoods, where most fireplaces are factory-built or direct-vent gas, and the chimney is a metal pipe inside a sided chase.
We sweep wood-burning fireplaces of every type here and service gas fireplaces and log sets. Call 847-994-4388 or book online.
The Original Brick Chimneys
The first Hoffman Estates houses are now around seventy years old. Their chimneys have been through several roofs and, in most cases, at least one furnace change. We see the same pattern repeatedly: a crown that has cracked across, mortar joints eroding near the top, and a firebox with loose or missing brick at the back. Inside the flue, clay tiles can crack or separate after decades of heating and cooling, which is why we recommend a Level 2 inspection on these chimneys before a sale or after an appliance change.
The Utility Flue After a Furnace Change
In older buildings the furnace and water heater usually shared one clay-lined flue. When the furnace is replaced with a high-efficiency unit that vents out the side wall, the water heater is left alone in a flue far larger than it needs. The exhaust cools and condenses on the way up, and the joints and tiles break down from the inside, usually first at the top of the chimney. NFPA 211, the national standard for chimneys, fireplaces and vents, calls for a Level 2 inspection, with video of the inside of the flue, whenever an appliance connected to a chimney is changed. When the tiles are cracked, offset or shedding, a liner sized to the water heater is the correction.
Factory-Built Fireplaces
A factory-built fireplace is a metal firebox and a metal chimney pipe inside a wood-framed chase, tested and listed as one system. Repairs have to use parts that match the listing. Cracked refractory panels and worn dampers are routine; a separated chimney section, or a firebox that can no longer be repaired with listed parts, means the fireplace should not be used until it is corrected. On top of the chase, a steel chase cover that has rusted through lets water run down inside the framing — one of the most common things we photograph. We will tell you which case you are in before you spend anything.
Crowns, Caps and Flashing
Whatever the age of the building, water does most of the damage. A cracked crown lets water into the top of the chimney, and each freeze pushes more of the brick face off. A missing cap lets in rain and animals. Flashing that was patched with sealant during a re-roof fails again within a few seasons. We photograph the crown, the top joints, the flashing and the cap on every visit and treat them as one water system, because fixing one while the others leak only moves the problem.
What We Do Most Often in Hoffman Estates
- Chimney sweep with a Level 1 inspection for masonry fireplaces, factory-built wood-burning fireplaces and stoves.
- Level 2 camera inspections before a sale and after a furnace or water heater change.
- Rusted chase cover replacement and chimney caps on factory-built chases.
- Refractory panel and damper repair on factory-built fireplaces.
- Stainless chimney liners for water heater and furnace flues.
- Crowns, flashing and firebox repair on masonry chimneys.
- Gas fireplace, gas log and direct-vent service by NFI-certified technicians.
Our Work in Hoffman Estates
Chimney Monkey has served Hoffman Estates since 2017. The photos below come straight from our own job records — 37 documented Hoffman Estates projects, and more we didn't photograph. Each caption lists the work and the street. We don't publish house numbers.
Chimney Caps & Chase Covers
Stainless caps, chase covers and cap-and-crown work on Hoffman Estates chimneys of every age.
Masonry Repair & Chimney Rebuilds
Brick and stone chimneys across Hoffman Estates — rebuilds above the roofline, tuckpointing and masonry repairs.







Factory-Built Chimneys & Direct-Vent Terminations
Metal chimney pipe, chases, caps and vent terminations for factory-built and direct-vent fireplaces in Hoffman Estates.



Fireplaces, Inserts & Gas Logs
Gas fireplaces, inserts, gas log sets and fireplace sweeps in Hoffman Estates living rooms and family rooms.






Before the Repair: What We Find in Hoffman Estates
Cracked crowns, spalling brick, rusted chase covers, nests and failing flue tiles. These are the conditions our inspections catch — usually before they become a leak or a safety problem inside the house.













Areas We Cover
All of Hoffman Estates, from the original neighborhoods near Higgins and Golf Roads to the subdivisions north of I-90 and west toward Barrington Road. We also work in neighboring Schaumburg, Palatine and Barrington.
Why Our Inspections Are Paid
We charge for inspections because the inspection is the service: we document what is actually happening with photographs and, where conditions allow, video of the inside of the flue, then explain what is urgent, what is maintenance and what can reasonably wait. A quote prices a job you already know you need. A diagnostic inspection determines what the job actually is. The report is yours whether or not we do the repair.
Who You Are Hiring
Chimney Monkey has been in business since 2017 and works out of Buffalo Grove. We are members and sponsors of the National Chimney Sweep Guild — our partner Brett Conklin serves on the NCSG board as an at-large director through 2027 — and we belong to the regional North Central Chimney Guild. Our technicians are NFI certified across wood-burning, gas and pellet appliances, we have SPRAT-certified technicians for rope-access work, and our crew trains through the year. One of our three partners is a U.S. military veteran. More than 1,100 Google reviews.
Our repairs and installations carry the Chimney Monkey Workmanship Warranty: 2 years on workmanship and materials, 3 years on venting and appliance systems, 12 years on structural masonry and liner installations — one step past the 1-2-10 residential standard, kept in force by an annual inspection.
Hoffman Estates Chimney Questions
How much does a chimney sweep cost in Hoffman Estates?
As of November 2026, a chimney sweep in Hoffman Estates is $335 to $350 and includes the Level 1 inspection, for masonry and factory-built wood-burning fireplaces alike. An inspection on its own is $205 to $300, and the same rate covers a utility chimney serving a furnace or water heater. A Level 2 inspection with video of the flue is around $300.
We replaced our furnace and the chimney is now too big. Is that real?
Yes. A flue built for a furnace and a water heater together is oversized once the furnace vents out the side wall. The water heater exhaust condenses in the extra space and damages the flue from the inside. The correction is a stainless liner sized to the water heater.
Our fireplace is factory-built. Does it need sweeping?
If it burns wood, yes: creosote builds up in the metal chimney pipe just as it does in a masonry flue. A gas-only direct-vent fireplace does not need sweeping, but it does need an annual inspection and service.
Do you charge for the inspection?
Yes. You are paying for a documented answer: photographs, video of the flue where conditions allow, and a written explanation of what needs correcting now and what can wait. The report is yours whether or not we do the repair.
Our Prices
Typical rates as of November 2026. A chimney sweep in Hoffman Estates is $335 to $350 with the Level 1 inspection included, for masonry and factory-built wood-burning fireplaces alike. An inspection on its own is $205 to $300, and the same rate covers a utility chimney serving a furnace or water heater. A Level 2 inspection with video of the flue is around $300. Crown replacement on a masonry chimney typically runs $850 to $2,600, depending on its size. Liners, chase covers, refractory panels and masonry are quoted in writing after the inspection, because pricing an unknown condition is guessing. The full list is on our chimney service costs page. Call 847-994-4388 to book or to confirm current pricing.

