Gas Fireplace Installation in Glencoe, IL Earns a 5-Star Review
By Chimney Monkey · Updated September 2026 · Glencoe, IL
Quick answer: A proper gas fireplace installation in Glencoe, IL follows four stages: assess, design, install, then verify with a leak check, a draft check, and a homeowner walkthrough.
In older North Shore homes, many of these jobs are wood-to-gas conversions, where correct liner sizing matters most.
Joe in Glencoe recently had Chimney Monkey handle a gas fireplace installation at his home. Ruffino led the project, and Joe left a five-star review calling the work high-quality and Ruffino easy to work with.
That combination of clean installation work and a good experience is exactly what homeowners hope for. It matters even more when adding a gas fireplace to an older North Shore home.
What Joe Said About His Gas Fireplace Installation
★★★★★
“Ruffino is great to work with. High quality work.”
— Joe, Glencoe, Illinois (Google review · read Joe’s full review on Google)
Joe’s review points to two things that matter on any installation:
Easy to work with
Ruffino made the project smooth for Joe.
High-quality work
A clean, well-finished installation.
Gas Fireplace Installation: What the Job Actually Involves
Chimney Monkey’s gas fireplace installations typically follow the same process, regardless of the home:
- Assess: The team reviews the layout and the existing gas supply.
- Design: Surrounds and finishes get planned with the homeowner.
- Install: The crew runs the gas line, venting, and any needed electrical work.
- Verify: A leak check, a draft check, and a walkthrough with the homeowner close out the job.
Once everything is connected, the job isn’t finished. A proper installation always ends with that final verification step.
Wood-to-Gas Conversions in Older North Shore Homes
For many North Shore homeowners, a gas fireplace installation is actually a wood-to-gas conversion. In fact, Chimney Monkey describes it as the most common gas fireplace job it does.
The original masonry fireplace and flue were built for wood, so correct liner sizing during a conversion matters. Undersized or mismatched venting can quietly cause problems long after the installation looks finished.
Practical takeaway: If you’re converting a wood-burning fireplace to gas, ask your installer how they will size the liner and venting for the new appliance.
Gas Fireplace Options for Glencoe Homes
Homeowners across Glencoe and the North Shore turn to Chimney Monkey for several types of gas fireplace work:
| Option | What it is |
|---|---|
| Direct-vent fireplace | A sealed gas unit that vents directly outdoors through a wall or roof. |
| Gas insert | A gas unit that fits inside an existing masonry fireplace and vents through a liner. |
| Gas log set | Gas burner and logs placed in an existing fireplace. |
| Wood-to-gas conversion | Turning an existing wood-burning fireplace into a gas one, with the right venting. |
Whether a home needs a brand-new installation or a conversion from an existing masonry fireplace, the process stays consistent: assess, design, install, then verify.
Gas Fireplace Installation Service in Glencoe, IL
For homeowners in Glencoe, Joe’s review reflects that process working the way it should. What to expect from a Chimney Monkey gas fireplace project:
Frequently Asked Questions
What does a gas fireplace installation involve?
Chimney Monkey’s process has four stages. The team assesses the layout and gas supply, designs surrounds and finishes, then installs the gas line, venting, and any needed electrical work. The job ends with a leak check, a draft check, and a homeowner walkthrough.
Can I convert my wood-burning fireplace to gas?
Yes. Wood-to-gas conversions are the most common gas fireplace job Chimney Monkey does on the North Shore. Because the original fireplace and flue were built for wood, the liner and venting need to be sized correctly for the new gas appliance.
Why does liner sizing matter in a gas conversion?
A masonry flue built for wood is often a different size than a gas appliance needs. Undersized or mismatched venting can quietly cause problems long after the installation looks finished. Correct sizing helps the new appliance vent properly.
What is the difference between a gas insert and a gas log set?
A gas insert is a unit that fits inside an existing masonry fireplace and vents through a liner. A gas log set places a gas burner and logs in an existing fireplace. Your installer can explain which option fits your home and fireplace.
Ready for a gas fireplace in your Glencoe home? Contact Chimney Monkey to talk through installation or a wood-to-gas conversion, or read Joe’s full review on Google first.
Not sure what service your home needs? Start with a professional evaluation so the system can be identified, the visible conditions can be documented, and the right next step can be recommended.
Have a question about your chimney, fireplace, venting system, gutters, or dryer vent? Schedule a professional visit and get clear recommendations based on the actual condition of your home.
Categories: Chimney Care Chimney Inspection Cook County Illinois Gas Appliance Installation Glencoe Local Services