Project RecapLake Forest, ILCompleted July 2026

Firebox Rebuild and Chimney Relining in Lake Forest

Last updated: ยท By the Chimney Monkey team

This firebox rebuild in Lake Forest restored a fireplace system from the bottom up: a new firebox, a parged smoke chamber and a new stainless steel flue liner. Chimney Monkey completed the work on the front-of-house chimney in July 2026. We are an NCSG member company with NFI-certified technicians, a 4.9-star Google rating and more than 1,100 reviews.

Short answer

In July 2026, Chimney Monkey restored a fireplace on the front-of-house chimney of a Lake Forest, IL home. The crew fully rebuilt the firebox with new firebrick, sealed the smoke chamber with refractory parging and installed a 23-foot stainless steel flue liner. Together, these repairs renewed the fireplace from the firebox to the top of the chimney.

1full firebox rebuild
1smoke chamber parged
23 ftstainless steel liner
3parts of one fireplace system

How does a fireplace system fit together, from firebox to flue?

A masonry fireplace is one vertical system: the firebox holds the fire, the smoke chamber funnels smoke upward and the flue carries it out of the house.

Each part has a separate job, so each part can wear out on its own. On this project, the crew worked on all three levels of the same system. As a result, the fireplace now has a new firebox at the bottom, a smooth smoke chamber in the middle and a continuous liner up to the top.

Stainless linerContinuous flue from the smoke chamber to the chimney top
Chimney flueThe passage inside the chimney that the liner now lines
Smoke chamberFunnel above the firebox, sealed with refractory parging
FireboxThe firebrick box where the fire burns, fully rebuilt
PartWhat it doesWork on this project
FireboxHolds the fire and takes direct heatFull rebuild with new firebrick
Smoke chamberFunnels smoke from the firebox into the flueStandard refractory parging
Chimney flueCarries smoke up and out of the houseRelined with stainless steel
Stainless linerForms a continuous flue inside the chimney23 ft installed

What does a full firebox rebuild involve?

New firebrick being laid on the back wall of a fireplace firebox during a rebuild
During: new firebrick going in on the back wall.

A full firebox rebuild removes and replaces every refractory brick that forms the firebox.

Refractory brick, often called firebrick, is made to handle the direct heat of a fire. First, the crew protected the stone surround with plastic and tape. Next, they removed the old firebrick and laid new brick on the back wall, sides and floor.

The fireplace surround on this home is stone, so the protection step mattered. Some facing materials can be fragile, and the crew works carefully around them. See our masonry repair page for related brick and mortar work.

The before and after photos below show the same firebox at the start and the end of the rebuild.

Original fireplace firebox protected with plastic and tape before a full rebuild
Before: the original firebox.
Finished rebuilt fireplace firebox inside a stone surround
After: the rebuilt firebox.

Why parge the smoke chamber during a firebox rebuild?

Smoke chamber parging seals gaps, cracks and holes in the smoke chamber with a smooth coat of refractory material.

The smoke chamber sits right above the firebox and funnels smoke into the flue. Its stepped brickwork, called corbelling, can leave rough surfaces and open joints. To reach it, the crew removes the existing damper and frame as needed, then applies the parging.

In this case, the photos show the same smoke chamber before and after parging. Before, the walls were rough and dark. Afterward, a smooth refractory coat surrounds the opening to the new liner.

Rough, sooty smoke chamber walls around a stainless liner opening before parging
Before: the smoke chamber before parging.
Smoke chamber coated smooth with refractory parging around a stainless liner
After: smooth parging around the liner.

Why install a stainless steel liner in the chimney flue?

A stainless steel liner gives the fireplace one continuous flue from the top of the smoke chamber to the top of the chimney.

Where needed, the crew breaks out and removes the old clay flue tiles first. Next, they insulate the liner, install it and secure it in the chimney. On this project, the crew installed 23 feet of liner, listed on the invoice as 11-inch.

The liner carries a manufacturer limited lifetime warranty for the original purchaser, which requires an annual inspection. Learn more on our chimney liner page.

Top of a stainless steel chimney liner set in fresh mortar at the top of a chimney
During: the top of the new liner at the chimney top.

Relining also changes how the system works inside. For that reason, the invoice notes that a powered chimney fan may become necessary in some cases.

How did this fireplace restoration come together?

The crew worked through the system level by level, from the firebox up to the top of the chimney.

01

Protect the room

They covered the stone surround and floor.

02

Remove old firebrick

The worn firebox came out completely.

03

Rebuild the firebox

New firebrick went in on every surface.

04

Install the liner

A 23 ft stainless liner went into the flue.

05

Parge the smoke chamber

Refractory parging sealed the chamber around the liner.

06

Finish the top

The liner was secured at the chimney top.

Typical sequence: the exact order can vary by job, but each level is finished so the next one connects cleanly.

Why does this project matter for Lake Forest homes?

Chimney Monkey serves Lake Forest from our base in Buffalo Grove, along with Chicago, the North Shore and the northwest suburbs.

Many fireplaces need work on more than one level of the system at the same time. Therefore, we look at the firebox, smoke chamber and flue together before recommending repairs. If you are not sure what your fireplace needs, a chimney inspection is the best first step. Our chimney repair team can then plan the right scope.

Signs your fireplace system may need attention

  • Cracked, loose or missing firebrick
  • Eroded mortar joints inside the firebox
  • Rough or open joints in the smoke chamber
  • Damaged or missing clay flue tiles
  • Smoke that rolls back into the room

Firebox rebuild and relining FAQs

What is the difference between a firebox, a smoke chamber and a flue?

The firebox is the firebrick box where the fire burns. Above it, the smoke chamber funnels smoke upward into the flue. The flue is the passage inside the chimney that carries smoke out of the house. This Lake Forest project included work on all three.

What is a full firebox rebuild?

A full firebox rebuild removes and replaces all of the refractory brick that forms the firebox. It suits a firebox that is worn throughout. On this project, the crew rebuilt the firebox with new firebrick on the back wall, sides and floor.

When does a firebox need a full rebuild instead of a repair?

A targeted repair fits when most of the firebox is sound and only some joints or bricks are damaged. In contrast, a full rebuild fits when wear runs through the whole firebox. The right choice depends on what an inspection finds.

What does smoke chamber parging do?

Parging seals gaps, cracks and holes in the smoke chamber with refractory material and smooths its stepped brickwork. The crew removes the damper and frame as needed to reach the chamber. In this home, the smoke chamber went from rough and dark to smooth.

Why install a stainless steel chimney liner?

A stainless steel liner creates one continuous flue from the smoke chamber to the top of the chimney. Where needed, the crew removes old clay tiles first. This Lake Forest chimney received 23 feet of stainless liner.

Does a stainless steel liner come with a warranty?

The liners we install carry a manufacturer limited lifetime warranty for the original purchaser. To keep that warranty, the homeowner is responsible for an annual inspection of the liner. That fits the NFPA 211 standard for annual chimney inspections.

Can a new liner change how a fireplace drafts?

Yes. Installing a flue liner changes the internal configuration of the system. In some cases, a powered chimney fan may become necessary. A technician can explain what to expect for your fireplace.

Why is the work done on the firebox, smoke chamber and liner together?

The three parts form one system, so problems in one level often show up alongside problems in another. Doing the work together means each level connects cleanly to the next. It also avoids opening the fireplace up more than once.

Standards referenced

  • NFPA 211, Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances (National Fire Protection Association): annual chimney inspection, with cleaning when the inspection shows it is needed.
  • Manufacturer documentation for the installed stainless steel liner.

Not sure what service your home needs? Start with a professional evaluation so the system can be identified, the visible conditions can be documented, and the right next step can be recommended.

Have a question about your chimney, fireplace, venting system, gutters, or dryer vent? Schedule a professional visit and get clear recommendations based on the actual condition of your home.

📞 Call (847) 994-4388 Schedule a Service Visit

Categories: Chimney Care Fireplace Services Lake County Illinois Lake Forest Local Services

Tags: , , , , , ,

VISIT DISPLAY ROOM BOOK ONLINE NOW

Don’t take our word for it. Ask an AI.

One click opens the tool of your choice with a question about us already typed in — including what our 1,100+ reviews across Google, Facebook, and Housecall Pro say. We’re comfortable with what comes back.

ChatGPTClaudePerplexityGeminiGrok