Exterior Chimney Restoration in South Barrington: Crown, Tuckpointing & Sealing
Last updated: · By the Chimney Monkey team
This exterior chimney restoration in South Barrington covered four connected repairs on a large natural stone chimney: tuckpointing, a full crown replacement, cleaning and waterproofing, and flashing resealing. Chimney Monkey completed the work in September 2026. We are an NCSG member company with NFI-certified technicians, a 4.9-star Google rating and more than 1,100 reviews.
Short answer
In September 2026, Chimney Monkey restored the exterior of a large stone chimney in South Barrington, IL. The crew renewed worn mortar joints, replaced the entire concrete crown, washed and waterproofed the masonry and resealed the roof flashing. Together, these repairs help the chimney shed water from top to bottom.
In this recap
Exterior Chimney Masonry Repairs and Tuckpointing
Tuckpointing renews worn mortar joints, and on this stone chimney it was the foundation of the whole restoration.
First, the crew removed deteriorated or loose mortar from the joints. Next, they packed in new mortar to restore proper joint depth. They also blended the finish with the existing masonry, so the repairs match the look of the stone.
Sound joints matter because mortar is the part of a chimney that wears first. Once joints erode, water can work deeper into the masonry. Our chimney tuckpointing page explains how this repair supports a chimney over time.

Full XX-Large Chimney Crown Replacement
The crew removed the old crown completely and built a new concrete crown sized for this extra-large chimney.
The original crown showed a worn, patched surface across its length. Instead of adding another patch, the crew took it off and started fresh.
The new crown has a proper slope, an expansion joint around the flue tile and an overhanging drip edge. As a result, water runs off the top and drips clear of the stone instead of running down its face.
Crown work also depends on the weather, because new concrete needs time to cure properly.


| Option | What it does | When it fits |
|---|---|---|
| Crown sealing | Coats the surface to slow water entry | The crown is sound, with only hairline wear |
| Crown patching | Fills small chips or cracks | Damage is limited to a few spots |
| Full crown replacement | Removes the old crown and builds a new one | The crown is worn or patched across much of its surface |
This project was a full replacement, not a patch or a sealer. Learn more on our chimney crown repair and replacement page.
Exterior Chimney Cleaning and Waterproofing

Exterior chimney cleaning washes the outside masonry, which is different from a chimney sweep that cleans the inside of the flue.
Here, the crew washed the stone to remove surface grime and growth, using a masonry detergent where needed. Afterward, they applied a vapor-permeable waterproofing treatment to the stone and mortar.
This type of treatment soaks into the masonry and limits how much liquid water it absorbs. Even so, it still lets moisture vapor escape, so the chimney can dry out. Cleaning reduces buildup, but it cannot promise to remove every old stain. See our chimney waterproofing page for details.
Chimney Flashing Resealing
The crew resealed the existing flashing where the chimney meets the roof; they did not replace it.
Flashing is the metal that bridges the gap between the chimney and the roofing. Over time, the sealant along that seam can wear. For this reason, the crew cleaned the flashing area and applied new sealant to reinforce the transition. If flashing is damaged or poorly installed, however, resealing alone may not be enough, and replacement becomes a separate repair.
The Importance of Coordinated Exterior Chimney Maintenance
Each exterior part of a chimney handles water in its own way, so a weak spot in one part can undercut the others.
For example, a new crown helps little if water still enters through open mortar joints below it. Likewise, fresh joints can still take on water through a failing crown. That is why this project addressed the crown, joints, masonry surface and flashing in one visit.
Our chimney restoration and chimney repair pages explain how we plan this kind of work.
Signs your chimney exterior may need attention
- Mortar joints that look recessed, sandy or loose
- A crown with cracks, chips or many old patches
- Dark staining or growth on the masonry
- Gaps or worn sealant along the roof flashing
- Water stains near the chimney inside the home
Chimney Restoration Services in South Barrington and Chicago’s North Shore
Chimney Monkey serves South Barrington from our base in Buffalo Grove, along with Chicago, the North Shore and the northwest suburbs.
Large natural stone chimneys like this one need masonry care that respects the stone. Therefore, the crew blended new mortar with the existing joints rather than changing the chimney’s look. If your chimney shows any of the signs above, an inspection is the best first step.
Exterior Chimney Restoration FAQs
What is the difference between exterior chimney cleaning and a chimney sweep?
Exterior chimney cleaning washes the outside masonry to remove grime and growth before waterproofing. In contrast, a chimney sweep cleans soot and creosote from inside the flue. This South Barrington project included exterior cleaning only. The two services solve different problems, so one does not replace the other.
When does a chimney crown need full replacement instead of patching?
A crown usually needs replacement when damage or old patches cover much of its surface. Patching suits small, isolated chips, while sealing suits a sound crown with hairline wear. On this chimney, the crew removed the old crown and built a new one with a slope, an expansion joint and a drip edge.
Is flashing resealing the same as flashing replacement?
No. Resealing cleans the flashing area and applies new sealant to flashing that is still usable. Replacement removes the old metal and installs new flashing. This project included resealing only. If flashing is damaged or poorly installed, replacement is a separate repair.
Can a stone chimney be tuckpointed and waterproofed?
Yes. Stone chimneys have mortar joints that wear like brick joints, so tuckpointing applies to them as well. A vapor-permeable waterproofing treatment can then protect both the stone and the mortar. This South Barrington chimney received both repairs during the same visit.
Standards referenced
- NFPA 211, Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances (National Fire Protection Association): annual chimney inspection, with cleaning when the inspection shows it is needed.
- Manufacturer documentation for the vapor-permeable masonry water repellent used on this project.
Not sure what service your home needs? Start with a professional evaluation so the system can be identified, the visible conditions can be documented, and the right next step can be recommended.
Have a question about your chimney, fireplace, venting system, gutters, or dryer vent? Schedule a professional visit and get clear recommendations based on the actual condition of your home.
Categories: Barrington Chimney Care Cook County Illinois Local Services Masonry Chimney Repair