
Get in Touch Morton Grove!
Book a chimney sweep or inspection in Morton Grove by calling 847-994-4388, emailing [email protected], or sending the form below. If the fireplace smokes on windy days, or the furnace or water heater was replaced recently, mention it — both change what we look at.
I cannot recommend them enough—they’re a family first crew and do excellent work, all while being awesome people and fun to work with.
Thank you!
Rebecca D
The team of 3 finished replacing our chimney crown in a day and a half. The office was easy to work with & responsive to phone calls.
We are mostly happy with the work they did. There were a few things that could have been done in a tidier manner (some concrete smears were left behind on our red brick & the metal flashing underneath the concrete is slightly uneven on 2 of the corners). This is our first chimney crown replacement, so I have no idea if these are normal things or not.
Update: I originally rated them 4/5 stars but changed the rating to 5/5. They were very quick to follow up about the bits we weren’t totally happy with. Brad came today to visually inspect the work & called me to explain what I was seeing. I’m satisfied with the service we received & would definitely use them again.
Update: Work was done by Rufino and his crew. They were quick, detailed, and service-focused. Very clean during and after the job (exterior work is messy). They did great.
Morton Grove grew almost all at once. The village had about 3,900 residents in 1950 and more than 20,000 by 1960, a boom that followed the opening of the Edens Expressway in 1951. Most of its houses — brick ranches, split-levels and Cape Cods — went up in that one decade, so whole streets have chimneys of the same age, built the same way. We serve the 60053 zip code from our shop in Buffalo Grove, about 20 minutes away.
Contact Info
Feel free to reach out to our office during our operating hours, Monday to Friday from 8am to 5pm, at 847-994-4388. We’re here to assist you with all your chimney needs!
Chimney Sweep in Morton Grove: Same Decade, Same Problems
When a village is built in ten years, its chimneys age in step. Most Morton Grove houses have a brick chimney from the 1950s with clay tile liners: a flue for the fireplace and, beside it, a flue for the furnace and water heater. Our job-photo records hold more than 40 documented Morton Grove projects since 2021, and the same handful of conditions comes up on street after street.
That makes your neighbor’s chimney useful information. If the house next door needed a new crown or a water heater liner, yours is the same age and was built the same way, so it is worth having it looked at before it shows up as a stain on the ceiling. Call 847-994-4388 or book online.
Split-Levels, Short Stacks and Smoke in the Room
Morton Grove has a lot of split-levels, and on many of them the chimney comes up through the lower roof while the upper roof sits only a few feet away. A chimney that is too short for its surroundings sits in the wind shadow of the house. On a breezy day air pushes down the flue instead of drawing up it, and smoke rolls out of the fireplace into the room.
The building codes and NFPA 211 use the same rule of thumb: a masonry chimney should rise at least 3 feet above the point where it passes through the roof, and at least 2 feet higher than any part of the building within 10 feet. We measure it. When a stack falls short, the options run from a draft-improving cap to extending the chimney, and we will tell you which one the conditions actually call for before you spend money on either. Sometimes the cause is not the height at all: a damper that does not open fully, or a kitchen exhaust fan pulling the house negative, produces the same smoke.
Clay Flues and Newer Furnaces
The utility flue is the one to watch. Once a Morton Grove furnace is replaced with a high-efficiency unit that vents out the side wall, the water heater is left alone in a flue built for two appliances. The exhaust cools and condenses in the oversized clay flue, and the moisture works on the joints from the inside and on the top of the chimney from the outside.
NFPA 211 calls for a Level 2 inspection, which includes video of the inside of the flue, whenever an appliance connected to a chimney is changed. The video shows whether the tiles are cracked, offset or shedding. When they are, the usual correction is a stainless chimney liner sized to the water heater. A flue venting a gas appliance every day goes to the top of the list; a fireplace flue with the same cracks can usually be scheduled.
Crowns and Brick After Seventy Winters
Most of the original crowns we see on 1950s Morton Grove chimneys are thin, flat mortar caps with no overhang. By now most of them have cracked. Water that gets past the crown soaks the top courses of brick, and every freeze pushes a little more of the brick face off. On the roof we usually find the same three things together: a cracked crown, open joints in the top few feet, and a cap that is missing or rusted through.
We recommend replacing a cracked crown rather than coating it again. A new crown with a proper overhang sends water off the chimney instead of into it, and it is considerably cheaper than rebuilding the top of the stack later.
Townhomes and Factory-Built Fireplaces
Not everything in Morton Grove is 1950s brick. The later townhome and condominium developments often have factory-built fireplaces: a metal firebox and metal chimney pipe inside a framed chase, tested and listed as one system. They are swept and inspected differently from masonry, and replacement parts have to match the manufacturer’s listing for the unit. We service both.
What We Do Most Often in Morton Grove
- Chimney sweep with a Level 1 inspection for wood-burning fireplaces.
- Level 2 camera inspections after a furnace or water heater change, before a sale, or on a chimney that has not been looked at in years.
- Stainless liners for water heater and furnace flues and for fireplaces with failed clay tile.
- Crown replacement, caps and tuckpointing on 1950s brick.
- Draft diagnosis on split-levels: chimney height, cap, damper and house pressure.
- Dryer vent cleaning in Morton Grove, often booked with the sweep.
- Gutter cleaning in Morton Grove — a clogged gutter beside the chimney dumps roof water straight onto the brick.
Our Work in Morton Grove
Chimney Monkey has served Morton Grove since 2017. The photos below come straight from our own job records — more than 40 documented Morton Grove projects between 2021 and 2025, and many more before and since. Each caption lists the work and the street. We don't publish house numbers.
Chimney Caps & Chase Covers
Stainless caps, chase covers and cap-and-crown work on Morton Grove chimneys of every age.











Chimney Crowns
A sound crown sheds water away from the brick instead of into it. New crowns, crown repairs and new clay pots.
Masonry Repair & Chimney Rebuilds
Brick and stone chimneys across Morton Grove — rebuilds above the roofline, tuckpointing and masonry repairs.







Flashing
Many "roof leaks" near a chimney are flashing failures. New step and counter flashing where the old work had failed.
Factory-Built Chimneys & Direct-Vent Terminations
Metal chimney pipe, chases, caps and vent terminations for factory-built and direct-vent fireplaces in Morton Grove.
Chimney Liners
Stainless liners for fireplaces, furnaces and water heaters — the part of the chimney you never see, and the one that matters most for safety.
Fireplaces, Inserts & Gas Logs
Gas fireplaces, inserts, gas log sets and fireplace sweeps in Morton Grove living rooms and family rooms.




Gutters
Gutter cleaning and guards. A clogged gutter beside a chimney sends roof water straight into the brick.
Before the Repair: What We Find in Morton Grove
Cracked crowns, spalling brick, rusted chase covers, nests and failing flue tiles. These are the conditions our inspections catch — usually before they become a leak or a safety problem inside the house.













Areas We Cover
All of Morton Grove, from the streets along Dempster Street, Lincoln Avenue and Waukegan Road to the blocks near Harrer Park and the forest preserves along the North Branch of the Chicago River. Next door we cover Skokie and Glenview, and Niles to the south and west.
Why Our Inspections Are Paid
We charge for inspections because the inspection is the service: we document what is actually happening with photographs and, where conditions allow, video of the inside of the flue, then explain what is urgent, what is maintenance and what can reasonably wait. A quote prices a job you already know you need. A diagnostic inspection determines what the job actually is. The report is yours whether or not we do the repair.
Who You Are Hiring
Chimney Monkey has been in business since 2017 and works out of Buffalo Grove. We are members and sponsors of the National Chimney Sweep Guild — our partner Brett Conklin serves on the NCSG board as an at-large director through 2027 — and we belong to the regional North Central Chimney Guild. Our technicians are NFI certified across wood-burning, gas and pellet appliances, we have SPRAT-certified technicians for rope-access work, and our crew trains through the year. One of our three partners is a U.S. military veteran. More than 1,100 Google reviews.
Our repairs and installations carry the Chimney Monkey Workmanship Warranty: 2 years on workmanship and materials, 3 years on venting and appliance systems, 12 years on structural masonry and liner installations — one step past the 1-2-10 residential standard, kept in force by an annual inspection.
Morton Grove Chimney Questions
How much does a chimney sweep cost in Morton Grove?
As of November 2026, a chimney sweep in Morton Grove is $335 to $350 and includes the Level 1 inspection. An inspection on its own is $205 to $300, and the same rate covers a utility chimney serving a furnace or water heater. A Level 2 inspection with video of the flue is around $300.
Our fireplace smokes when it is windy. Is the chimney too short?
Possibly, especially on a split-level. We measure the chimney against the 3-foot and 2-feet-within-10-feet rule, and we also check the damper, the cap and whether exhaust fans are pulling air down the flue. The fix depends on which of those it is.
Our neighbor needed a new crown. Will we?
Not necessarily, but your chimney is likely the same age and built the same way, so it is worth checking. We photograph the crown, joints and cap and tell you whether it is maintenance, something to schedule, or fine as it is.
Can a new water heater use the original clay flue?
It depends on the size of the flue and whether the furnace still shares it. Once the furnace vents out the side wall, the original flue is usually too large for the water heater alone, and a stainless liner sized to the appliance is the correction.
Do you work on factory-built fireplaces in Morton Grove townhomes?
Yes. We sweep and inspect them, and repairs use parts that match the manufacturer’s listing for the unit.
Do you charge for the inspection?
Yes. You are paying for a documented answer: photographs, video of the flue where conditions allow, and a written explanation of what needs correcting now and what can wait. The report is yours whether or not we do the repair.
Our Prices
Typical rates as of November 2026. A chimney sweep in Morton Grove is $335 to $350 with the Level 1 inspection included. An inspection on its own is $205 to $300, and the same rate covers a utility chimney serving a furnace or water heater. A Level 2 inspection with video of the flue is around $300. Crown replacement typically runs $850 to $2,600, depending on the size of the chimney. Liners, masonry, draft corrections and firebox work are quoted in writing after the inspection, because pricing an unknown condition is guessing. The full list is on our chimney service costs page. Call 847-994-4388 to book or to confirm current pricing.









