Chimney Sweep Mundelein, IL: Brick Flues & Prefab

Get in touch Village of Mundelein, IL!

Book a chimney sweep or inspection in Mundelein by calling 847-994-4388, emailing [email protected], or sending the form below. If you know roughly when the house was built, include it — Mundelein has houses from almost every decade of the last hundred years, and the chimney depends on which one you have.

    A photo of your fireplace inside or chimney outside helps us understand your request. For other services, you can show the area that needs attention. JPG, PNG, WebP or HEIC, up to 10 MB. You can send your request without a photo.

    Mundelein was incorporated in 1909 and took its current name in 1925. The village had about 3,200 residents in 1950 and more than 10,000 by 1960, as lake neighborhoods such as Loch Lomond and the subdivisions around Diamond Lake filled in, and it kept growing to more than 30,000 by 2000. We serve the 60060 zip code from our shop in Buffalo Grove, about 15 minutes away.

    Contact your local chimney sweep

    You’re welcome to contact our office during our operating hours, which are Monday to Friday from 8am to 5pm. Our phone number is 847-994-4388. We’re here to assist you with any inquiries or to help you schedule your chimney services. Your satisfaction and safety are our top priorities!

    Chimney Sweep in Mundelein: Houses From Almost Every Decade

    A chimney sweep in Mundelein can mean a 1920s house near downtown, a 1950s brick ranch in Loch Lomond, or a factory-built fireplace in a subdivision from the 1990s. Our job-photo records hold about 40 documented Mundelein projects since 2021, and they split roughly along those lines:

    • Older homes near downtown and Park Street, some with flues that were never lined and some with clay liners at the end of their life.
    • 1950s and 1960s brick ranches and split-levels, the village’s first big building wave, with clay tile flues for the fireplace and for the furnace and water heater.
    • Subdivisions from the 1980s on, where, in our experience, most fireplaces are factory-built or direct-vent gas.

    We sweep wood-burning fireplaces of every type here and service gas units. Call 847-994-4388 or book online.

    Pre-War Chimneys Near Downtown

    The oldest Mundelein houses have chimneys that predate modern liner requirements. Some flues were never lined; others have clay tile that has been heated and cooled for close to a century. Most of these chimneys have also been through several roofs, and each re-roof is a chance for the flashing to be patched rather than replaced. We start these with a Level 2 inspection, because the condition inside the flue decides everything else. An unlined or badly deteriorated flue should not be used until it is corrected, and relining with a stainless chimney liner is the usual fix.

    The 1950s Brick Ranch and Its Utility Flue

    In the post-war neighborhoods, the furnace and water heater originally shared one clay-lined flue. When the furnace is replaced with a high-efficiency unit vented through the side wall, the water heater is left alone in a flue far larger than it needs. The exhaust cools and condenses on the way up, and the joints and tiles break down from the inside, usually first at the top of the chimney.

    NFPA 211, the national standard for chimneys, fireplaces and vents, calls for a Level 2 inspection, with video of the inside of the flue, whenever an appliance connected to a chimney is changed. The video shows whether the tiles are cracked, offset or shedding. When they are, a liner sized to the water heater is the correction, and a flue venting a gas appliance every day goes to the top of the list.

    Crowns, Caps and Seventy Winters

    Most original crowns on 1950s chimneys are thin, flat mortar caps without an overhang, and by now most of them have cracked. Water that gets past the crown soaks the top courses of brick, and each freeze pushes more of the face off. We photograph the crown, the top joints, the flashing and the cap, and we recommend replacing a cracked crown rather than coating it again. A missing cap is the other common find. A cap keeps rain and animals out of the flue and costs a great deal less than evicting a family of raccoons.

    Factory-Built Fireplaces in the Newer Subdivisions

    The subdivisions on Mundelein’s edges mostly have factory-built fireplaces: a metal firebox and metal chimney pipe inside a framed chase, with a sheet-metal cover on top. They are listed as one system, so repairs use parts that match the manufacturer’s listing. What we find most often is worn refractory panels, rusted chase covers that let water into the chase, and caps that have come loose. Direct-vent gas fireplaces do not build up creosote, but they still need an annual check of the burner, the glass gasket and the vent outside.

    What We Do Most Often in Mundelein

    • Chimney sweep with a Level 1 inspection for masonry fireplaces, factory-built wood-burning fireplaces and stoves.
    • Level 2 camera inspections on older homes, before a sale, and after a furnace or water heater change.
    • Stainless liners for water heater and furnace flues and for unlined fireplace flues.
    • Crown replacement, caps, flashing and tuckpointing.
    • Chase covers and refractory panels on factory-built fireplaces.
    • Dryer vent cleaning in Mundelein, often booked on the same visit.
    • Gutter cleaning in Mundelein — a clogged gutter beside a chimney sends roof water straight into the brick.


    Areas We Cover

    All of Mundelein, from the older blocks around downtown, Park Street and Route 45 to Loch Lomond, the neighborhoods around Diamond Lake, and the newer subdivisions off Route 60 and Route 83. We also work in neighboring Vernon Hills and Grayslake, and in Libertyville and Ivanhoe.

    Why Our Inspections Are Paid

    We charge for inspections because the inspection is the service: we document what is actually happening with photographs and, where conditions allow, video of the inside of the flue, then explain what is urgent, what is maintenance and what can reasonably wait. A quote prices a job you already know you need. A diagnostic inspection determines what the job actually is. The report is yours whether or not we do the repair.

    Who You Are Hiring

    Chimney Monkey has been in business since 2017 and works out of Buffalo Grove. We are members and sponsors of the National Chimney Sweep Guild — our partner Brett Conklin serves on the NCSG board as an at-large director through 2027 — and we belong to the regional North Central Chimney Guild. Our technicians are NFI certified across wood-burning, gas and pellet appliances, we have SPRAT-certified technicians for rope-access work, and our crew trains through the year. One of our three partners is a U.S. military veteran. More than 1,100 Google reviews.

    Our repairs and installations carry the Chimney Monkey Workmanship Warranty: 2 years on workmanship and materials, 3 years on venting and appliance systems, 12 years on structural masonry and liner installations — one step past the 1-2-10 residential standard, kept in force by an annual inspection.

    Mundelein Chimney Questions

    How much does a chimney sweep cost in Mundelein?

    As of November 2026, a chimney sweep in Mundelein is $335 to $350 and includes the Level 1 inspection. An inspection on its own is $205 to $300, and the same rate covers a utility chimney serving a furnace or water heater. A Level 2 inspection with video of the flue is around $300.

    Our house near downtown is from the 1920s. Is the chimney safe to use?

    Not until it has been inspected. Chimneys that old may have no liner or a liner past its life. A Level 2 inspection shows what is inside the flue, and an unlined or badly deteriorated flue should not be used until it is relined.

    We replaced our furnace and the chimney is now too big. Is that real?

    Yes. A flue built for a furnace and a water heater together is oversized once the furnace vents out the side wall. The water heater exhaust condenses in the extra space and damages the flue from the inside. The correction is a stainless liner sized to the water heater.

    How often should a Mundelein chimney be inspected?

    NFPA 211 calls for an annual inspection of chimneys, fireplaces and vents, with cleaning when deposits are found. For a fireplace you use regularly, that usually means a sweep every year; for one you rarely use, an inspection every year.

    Our newer house has a factory-built fireplace. Does it need sweeping?

    If it burns wood, yes, the same as a masonry fireplace. A gas-only direct-vent fireplace does not need sweeping, but it does need an annual inspection and service.

    Do you charge for the inspection?

    Yes. You are paying for a documented answer: photographs, video of the flue where conditions allow, and a written explanation of what needs correcting now and what can wait. The report is yours whether or not we do the repair.

    Our Prices

    Typical rates as of November 2026. A chimney sweep in Mundelein is $335 to $350 with the Level 1 inspection included. An inspection on its own is $205 to $300, and the same rate covers a utility chimney serving a furnace or water heater. A Level 2 inspection with video of the flue is around $300. Crown replacement typically runs $850 to $2,600, depending on the size of the chimney. Liners, chase covers, masonry and firebox work are quoted in writing after the inspection, because pricing an unknown condition is guessing. The full list is on our chimney service costs page. Call 847-994-4388 to book or to confirm current pricing.

    VISIT DISPLAY ROOM BOOK ONLINE NOW

    Don’t take our word for it. Ask an AI.

    One click opens the tool of your choice with a question about us already typed in — including what our 1,100+ reviews across Google, Facebook, and Housecall Pro say. We’re comfortable with what comes back.

    ChatGPTClaudePerplexityGeminiGrok