Chimney Rebuild in Winnetka: Roofline Brick, Two New Crowns and a Stainless Cap
Last updated: · By the Chimney Monkey team
This chimney rebuild in Winnetka restored a weathered roofline chimney with new brick, two concrete crowns and a stainless steel cap. Chimney Monkey has served the North Shore since 2017. In addition, we are an NCSG member company with NFI-certified technicians, a 4.9-star Google rating and more than 1,100 reviews. Below, we explain what the crew documented, what they rebuilt and how each layer now works together to shed water.Short answer
In July 2026, Chimney Monkey completed a partial chimney rebuild on a Winnetka home. The crew rebuilt the deteriorated upper brick, poured two new concrete crowns, resealed the flashing and installed a stainless multi-flue cap. Finally, they washed and waterproofed both chimneys to slow future water damage.In this recap
- What did this chimney rebuild include?
- Why did the upper chimney need rebuilding?
- Partial rebuild, tuckpointing or full rebuild?
- What makes a new chimney crown last?
- Why add a cap and waterproofing?
- How did the project come together?
- What does a chimney rebuild cost?
- Why does this matter for Winnetka homes?
- FAQs
What did this chimney rebuild in Winnetka include?

Before: the original crown and upper brick above the roofline.
The project covered six connected services on two chimneys, all completed during one visit in July 2026.
The main chimney sat on the roof ridge with a worn concrete crown, a wire animal screen and dark, weathered brick. Meanwhile, a second, smaller chimney also needed a new crown. As a result, the crew treated the job as one restoration rather than a list of separate fixes.Masonry work
- ✓ Partial chimney rebuild from the roofline up
- ✓ Closest available brick and mortar match
- ✓ Two full concrete crown rebuilds
Water protection
- ✓ Flashing resealed at the roofline
- ✓ Both chimneys washed and waterproofed
- ✓ Stainless multi-flue cap installed
Why did the upper chimney need a partial rebuild?
Photos from the visit show spalling brick and eroded mortar near the flashing. That pattern usually means water has been entering the masonry for some time.
Spalling happens when brick faces flake or pop off. In our climate, water soaks into the brick, freezes, expands and then thaws again. Over many winters, that cycle can break down both the brick and the mortar joints around it.
Before: spalled brick faces and worn mortar near the flashing line.
How does a partial rebuild compare with tuckpointing or a full rebuild?
A partial rebuild sits between tuckpointing and a full rebuild, because it replaces only the damaged section of the chimney.
| Repair | What it fixes | When it fits |
|---|---|---|
| Tuckpointing | Worn mortar joints | Brick is solid, but joints are eroding |
| Partial rebuild | Damaged brick and mortar in one section, often above the roofline | Upper brick is spalling or loose, while the lower chimney is sound |
| Full rebuild | The whole chimney structure | Damage runs the full height, or the chimney leans or is unstable |
What makes a new chimney crown last?

After: the new crown on the main chimney, before the cap went on.
A lasting crown is sloped, sealed around each flue tile and wide enough to form a drip edge past the brick.
On both chimneys, the crew removed the old crowns and formed new concrete ones. Each crown slopes away from the flue, so water runs off instead of pooling. In addition, an expansion joint around each flue tile lets the tile move with heat without cracking the concrete.
After: the rebuilt crown on the second chimney.
How the layers work together
Each layer of this chimney now has its own job in keeping water out.Why add a multi-flue cap and waterproofing after a rebuild?

After: the finished chimney with its new brick, crown, cap and flashing.
A cap and a water repellent protect the new masonry, so the rebuild lasts longer.
The crew fitted a top-mounted stainless steel cap that covers both flues at once. It has a mesh screen and carries a manufacturer lifetime warranty. Our chimney cap installation page explains the cap styles we install.How did this chimney rebuild come together step by step?
The work moved from the top of the chimney down to the roofline, then back up to the cap.
Set up safe access
Crews staged equipment to work safely on the steep roof.Remove damage
They took down the spalled brick and the old crowns.Rebuild brick
New brick went up from the roofline with a close mortar match.Pour two crowns
The crew formed sloped concrete crowns with drip edges and expansion joints.Seal and protect
They resealed the flashing, then washed and waterproofed both chimneys.Install the cap
A stainless multi-flue cap now covers both flues.Typical sequence: crown work depends on the weather, because new concrete needs dry conditions to cure properly.
What does a chimney rebuild cost in Winnetka?
Most partial rebuilds that also include new crowns, a cap and waterproofing fall in a broad range of about $7,000 to $12,000.
Crown rebuild only
$1,500 – $3,000
Per small masonry chimney, for removing the old crown and pouring a new sloped concrete crown.Roofline rebuild package
$7,000 – $12,000
Partial rebuild plus new crowns, flashing work, waterproofing and a stainless cap.Signs your chimney may need a rebuild
- Brick faces flaking, popping or crumbling
- Mortar joints recessed or washing out
- A cracked or crumbling crown
- White staining (efflorescence) on the brick
- Loose bricks near the top of the chimney
- Water stains near the chimney inside the home
Why does this chimney rebuild matter for Winnetka homes?
Many Winnetka homes have older masonry chimneys that face years of freeze-thaw cycles, so the top of the chimney often wears out first.
Catching that wear early can keep a repair smaller. For example, a crown replacement alone costs far less than rebuilding brick after years of water damage. Visit our Winnetka chimney services page to see what we offer nearby. You can also read about a similar roofline chimney rebuild in Mundelein.Chimney rebuild FAQs
How do I know if my chimney needs a rebuild or just repairs?
A chimney usually needs a rebuild when the brick itself is spalling, loose or crumbling. On the other hand, worn mortar on solid brick can often be tuckpointed instead. A professional chimney inspection can show which repair fits, because the visible condition of the brick and crown guides that decision.What is a partial chimney rebuild?
A partial chimney rebuild replaces only the damaged section of a chimney, most often the part above the roofline. The crew takes down the failing brick and rebuilds it with a close brick and mortar match. Meanwhile, the sound masonry below stays in place, which keeps the project smaller than a full rebuild.How long does a new concrete chimney crown last?
A well-built concrete crown can last for many years when it is sloped, has a drip edge and includes an expansion joint around the flue. However, weather, maintenance and the condition of the masonry below all affect its lifespan. A cap and regular inspections help protect it.Why did this project include two crown rebuilds?
This Winnetka home has two chimneys, and each one needed a new crown. The main chimney received its crown after the brick rebuild. The second, smaller chimney also received a new sloped crown, so both chimneys now shed water the same way.What is the difference between a chimney crown and a chimney cap?
A crown is the concrete slab that covers the top of the masonry and sheds water. In contrast, a cap is the metal cover that sits above the flue opening. The cap keeps out rain, debris and animals. Most chimneys benefit from both, which is why this project included a new crown and a stainless cap.Is chimney flashing resealing the same as flashing replacement?
No. Resealing closes gaps in flashing that is still in usable shape, while replacement removes the old metal and installs new flashing. On this project, the crew resealed the existing flashing at the roofline. Our flashing repair page explains both options.Why waterproof a chimney after rebuilding it?
Waterproofing helps new brick and mortar resist water, which is the main cause of spalling. A vapor-permeable repellent blocks liquid water from soaking in. Even so, it still lets moisture vapor escape from inside the masonry. As a result, the rebuilt chimney stays drier through freeze-thaw cycles.Does weather affect when a chimney crown can be poured?
Yes. New concrete needs suitable weather to cure properly, so crown work is weather-dependent. Rain or freezing temperatures can delay the pour. For that reason, we schedule crown rebuilds around the forecast. Most North Shore homeowners find spring through fall the easiest time to plan this work.Standards referenced
- NFPA 211, Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances (National Fire Protection Association): annual chimney inspection; cleaning when the inspection shows it is needed.
- Manufacturer documentation for the installed stainless multi-flue cap and the vapor-permeable water repellent.
Not sure what service your home needs? Start with a professional evaluation so the system can be identified, the visible conditions can be documented, and the right next step can be recommended.
Have a question about your chimney, fireplace, venting system, gutters, or dryer vent? Schedule a professional visit and get clear recommendations based on the actual condition of your home.
Categories: Chimney Cap Cook County Illinois Local Services Masonry Chimney Repair Masonry Contractor Services Winnetka