Chimney Shoulder Rebuild and Crown Restoration in Libertyville
Last updated: ยท By the Chimney Monkey team
This chimney shoulder rebuild in Libertyville fixed a part of the chimney many homeowners never notice: the sloped ledge where a wide chimney steps inward. Chimney Monkey rebuilt and resealed that shoulder, replaced the crown, tuckpointed the brick and washed and waterproofed the whole chimney. We are an NCSG member company with NFI-certified technicians, a 4.9-star Google rating and more than 1,100 reviews.
Short answer
In August 2026, Chimney Monkey restored the exterior of a brick chimney in Libertyville, IL. The crew rebuilt and resealed the chimney shoulder, replaced the cracked concrete crown, tuckpointed worn mortar joints and washed and waterproofed the masonry. The visit was an exterior-only inspection and repair.
In this recap
What is a chimney shoulder?
A chimney shoulder is the masonry transition where a wider section of the chimney steps inward to a narrower one.
On many homes, the lower part of the chimney is wider because it surrounds the fireplace. Higher up, the chimney narrows to the flue. The shoulder is the ledge in between, usually topped with a sloped cap. Because it faces the sky, the shoulder catches rain and snow on its way down the chimney.
Four things decide how well a shoulder handles water: its shape, its slope, the condition of the mortar around it and how well it sheds water off the brick. If any of those fail, water can sit on the ledge or soak into the masonry below.
How was the chimney shoulder rebuilt?

The crew repaired and reshaped the shoulder so water runs off and away from the brick.
First, they removed the old, deteriorated shoulder cap down to the masonry below. This photo shows that stage, with the core of the shoulder exposed. Next, they rebuilt the shoulder contour as needed to restore a proper slope.
Finally, they resealed the area to help guide rainwater away from the chimney and the nearby masonry. Shoulder work is an add-on during an existing visit rather than a standalone service.
The before and after photos below show the same shoulder. Before, the old cap was cracked and broken along its edge. Afterward, a smooth new slope sheds water past the brick face.


Why did the chimney crown need replacing?
The crew replaced the cracked crown with a new concrete crown sized for a small masonry chimney.
The crown is the concrete slab at the very top of the chimney. In this case, the old crown had a visible crack running across its surface. Therefore, the crew removed it completely and formed a new one with wood forms around the top of the chimney.
The new crown has a proper slope, an expansion joint around the flue tile and an overhanging drip edge. As a result, water moves off the top and drips clear of the brick. Learn more on our chimney crown repair and replacement page.


Why were the brick joints tuckpointed and waterproofed?
Tuckpointing renews worn mortar joints, and waterproofing then helps protect the brick and mortar from water.
First, the crew removed deteriorated or loose mortar from the joints as needed. Next, they installed new mortar to restore proper joint depth and blended the finish with the existing brick. Our tuckpointing page explains this repair.
Afterward, the crew washed the chimney to remove surface grime and growth. They then applied a vapor-permeable waterproofing treatment, which limits water absorption while letting moisture vapor escape. See our chimney waterproofing page for details.

Note: washing reduces buildup and growth, but it cannot promise to remove every old stain. Waterproofing is also required for warranty coverage on tuckpointing.
How do the shoulder, crown, mortar and waterproofing work together?
Each part handles water at a different height on the chimney, so a weak spot in one can undercut the others.
| Repair | What it fixes | What it does not fix |
|---|---|---|
| Shoulder rebuild and reseal | Restores the slope and seal on the chimney ledge | It does not protect the top of the chimney |
| Crown replacement | Replaces the slab that sheds water off the top | It does not seal the shoulder below |
| Tuckpointing | Renews worn mortar joints | It does not stop water absorption on its own |
| Waterproofing | Limits water absorption into brick and mortar | It does not repair failed mortar |
For example, a new crown helps little if water still collects on a broken shoulder lower down. Likewise, waterproofing works best once the mortar joints are sound. That is why this project treated the whole exterior in one visit.
This visit included an exterior inspection only. The project did not involve the fireplace or the inside of the flue.
Why does this project matter for Libertyville homes?
Chimney Monkey serves Libertyville from our base in Buffalo Grove, along with Chicago, the North Shore and the northwest suburbs.
Many homes have a wide lower chimney that narrows partway up, so they have a shoulder to maintain. However, the shoulder is easy to overlook because it sits along the side of the house. If you are not sure about the condition of yours, a chimney inspection is a good first step. Our masonry repair team can then plan the right repairs.
Signs your chimney shoulder may need attention
- Cracks or broken edges on the shoulder cap
- Water pooling on the ledge after rain
- Loose or recessed mortar around the shoulder
- Staining on the brick just below the shoulder
- Pieces of the shoulder cap falling near the house
Chimney shoulder repair FAQs
What is a chimney shoulder?
A chimney shoulder is the sloped masonry ledge where a wide lower chimney steps inward to a narrower upper section. It usually has a sloped cap that sheds water. This Libertyville chimney has a shoulder near the roof eave, and the crew rebuilt and resealed it.
Why does the slope of a chimney shoulder matter?
The slope moves rain and melting snow off the ledge and away from the brick. If the slope is lost, water can sit on the shoulder or soak into the masonry below. Rebuilding the shoulder contour restores that slope.
What does a shoulder rebuild and reseal include?
The crew repairs and reshapes the shoulder to promote proper water runoff. Where needed, they rebuild the shoulder contour, then reseal the area to guide water away from the chimney. On this project, it was done during the same visit as the crown and masonry work.
Can I get only a chimney shoulder repair?
Shoulder rebuild and reseal is an additional service performed during an existing visit. It is not offered as a standalone service. In this case, it was part of a larger exterior repair that included a new crown, tuckpointing and waterproofing.
What is the difference between a crown and a shoulder?
The crown is the concrete slab at the very top of the chimney. In contrast, the shoulder is the sloped ledge lower down, where the chimney narrows. Both shed water, but they sit at different heights and need separate repairs.
Does waterproofing fix worn mortar joints?
No. Waterproofing limits water absorption, but it does not repair failed mortar. Worn joints need tuckpointing first. This Libertyville chimney was tuckpointed before it was washed and waterproofed.
What does exterior inspection only mean?
An exterior-only inspection covers the outside of the chimney, such as the crown, shoulder, brick and mortar. It does not cover the fireplace or the inside of the flue. This project included an exterior inspection only.
Why is safe-access equipment needed for chimney repairs?
Chimney work often happens well above the ground, so crews need a stable way to reach the crown and shoulder. Safe access can include climbing equipment, platforms, extra ladders or scaffolding. This project required safe-access equipment.
Standards referenced
- NFPA 211, Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances (National Fire Protection Association): annual chimney inspection, with cleaning when the inspection shows it is needed.
- Manufacturer documentation for the vapor-permeable masonry water repellent.
Not sure what service your home needs? Start with a professional evaluation so the system can be identified, the visible conditions can be documented, and the right next step can be recommended.
Have a question about your chimney, fireplace, venting system, gutters, or dryer vent? Schedule a professional visit and get clear recommendations based on the actual condition of your home.
Categories: Chimney Care Chimney Exterior Services Chimney Inspection Lake County Illinois Libertyville Local Services Masonry Chimney Repair