Get in touch Village of Gurnee, IL!
Book a chimney sweep or inspection in Gurnee by calling 847-994-4388, emailing [email protected], or sending the form below. Let us know whether you are east or west of I-94 — in Gurnee that is a fair first guess at what kind of fireplace we will find.
Gurnee was mostly farmland until the 1960s. Great America opened in 1976 and Gurnee Mills in 1991, and the village grew from about 7,200 residents in 1980 to nearly 29,000 by 2000. I-94 splits the housing: the older homes, from the 1940s through the 1960s, are mostly on the east side, and the subdivisions built from the 1980s on fill the west. We serve the 60031 zip code from our shop in Buffalo Grove, about 20 to 25 minutes away.
Contact your local chimney sweep
You can call our office from Monday to Friday from 8am – 5pm at 847 994 4388
Chimney Sweep in Gurnee: Two Sides of I-94
A chimney sweep in Gurnee depends a lot on which side of the tollway you live on. East of I-94, the older homes mostly have brick chimneys with clay tile flues. West of it, in the subdivisions built during Gurnee’s growth from the 1980s on, most fireplaces we see are factory-built or direct-vent gas units. Our job-photo records hold more than 30 documented Gurnee projects since 2021, on both sides.
We sweep wood-burning fireplaces of every type, masonry, factory-built and stoves, and we service gas fireplaces. Call 847-994-4388 or book online.
Factory-Built Fireplaces Reaching Middle Age
A factory-built fireplace is a metal firebox and a metal chimney pipe inside a wood-framed chase, tested and listed as one system. The fireplaces put into Gurnee’s 1980s and 1990s subdivisions are now 25 to 45 years old, which is when the wear shows: cracked or crumbling refractory panels, chimney pipe sections that have separated, dampers that no longer close, and fireboxes whose manufacturer has been bought out or closed.
Because the unit is listed as a system, repairs have to use parts that match that listing. Worn panels are a routine repair. A separated chimney, or a firebox that can no longer be repaired with listed parts, means the fireplace should not be used until it is corrected, and sometimes the right answer is replacing the fireplace and chimney together. We will tell you which case you are in, and what each option involves, before you spend anything.
Chase Covers and Water in the Chase
The box on the roof over a factory-built fireplace is a framed chase, and the sheet-metal cover on top is what keeps water out. The original covers on most 1980s and 1990s Gurnee houses were painted steel. They rust, sag and hold standing water, and that water runs down inside the chase onto the framing and the top of the firebox, often for years before a stain shows up inside. We photograph the cover, the cap and the chase siding, and when a cover has rusted through we recommend a stainless replacement shaped to shed water.
Sealed Gas Fireplaces
Many west-side homes have direct-vent gas fireplaces: a sealed glass front, with combustion air drawn in and exhaust sent out through a pipe in the side wall or roof. They do not build up creosote, but they are not maintenance-free. Our NFI-certified technicians check the burner and log set, the pilot and ignition, the glass gasket, and the vent termination outside, which wasps and birds both seem to find appealing. Once a year is the normal interval.
East-Side Brick Chimneys
The older homes east of I-94 have brick chimneys that age the way post-war masonry ages everywhere. The original mortar crowns crack and let water into the top of the chimney, and once a furnace is replaced with a high-efficiency unit that vents out the side wall, the water heater is left in a clay flue far larger than it needs, where its exhaust condenses and breaks the flue down from the inside. NFPA 211, the national standard for chimneys, fireplaces and vents, calls for a Level 2 inspection, with video of the inside of the flue, when an appliance is changed or a house is sold. A stainless chimney liner sized to the appliance is the usual correction.
What We Do Most Often in Gurnee
- Chimney sweep with a Level 1 inspection for factory-built wood-burning fireplaces, masonry fireplaces and stoves.
- Level 2 camera inspections before a sale, after an appliance change, or when a prefab chimney may have separated.
- Refractory panel, damper and chimney section repairs on factory-built fireplaces, with parts that match the listing.
- Stainless chase covers and caps.
- Direct-vent and gas fireplace service by NFI-certified technicians.
- Crowns and stainless liners for east-side brick chimneys.
- Dryer vent cleaning in Gurnee, often booked on the same visit.
- Gutter cleaning in Gurnee.
Our Work in Gurnee
Chimney Monkey has served Gurnee since 2017. The photos below come straight from our own job records — 33 documented Gurnee projects between 2021 and 2025, and many more before and since. Each caption lists the work and the street. We don't publish house numbers.
Chimney Caps & Chase Covers
Stainless caps, chase covers and cap-and-crown work on Gurnee chimneys of every age.
Chimney Crowns
A sound crown sheds water away from the brick instead of into it. New crowns, crown repairs and new clay pots.
Masonry Repair & Chimney Rebuilds
Brick and stone chimneys across Gurnee — rebuilds above the roofline, tuckpointing and masonry repairs.







Flashing
Many "roof leaks" near a chimney are flashing failures. New step and counter flashing where the old work had failed.
Factory-Built Chimneys & Direct-Vent Terminations
Metal chimney pipe, chases, caps and vent terminations for factory-built and direct-vent fireplaces in Gurnee.




Fireplaces, Inserts & Gas Logs
Gas fireplaces, inserts, gas log sets and fireplace sweeps in Gurnee living rooms and family rooms.








Before the Repair: What We Find in Gurnee
Cracked crowns, spalling brick, rusted chase covers, nests and failing flue tiles. These are the conditions our inspections catch — usually before they become a leak or a safety problem inside the house.











Areas We Cover
All of Gurnee, east and west of I-94: the older neighborhoods on the east side and the subdivisions to the west off Grand Avenue, Hunt Club Road, Washington Street and Gages Lake Road. We also work in neighboring Grayslake and Waukegan, and in Libertyville, Wadsworth and Lindenhurst.
Why Our Inspections Are Paid
We charge for inspections because the inspection is the service: we document what is actually happening with photographs and, where conditions allow, video of the inside of the flue, then explain what is urgent, what is maintenance and what can reasonably wait. A quote prices a job you already know you need. A diagnostic inspection determines what the job actually is. The report is yours whether or not we do the repair.
Who You Are Hiring
Chimney Monkey has been in business since 2017 and works out of Buffalo Grove. We are members and sponsors of the National Chimney Sweep Guild — our partner Brett Conklin serves on the NCSG board as an at-large director through 2027 — and we belong to the regional North Central Chimney Guild. Our technicians are NFI certified across wood-burning, gas and pellet appliances, we have SPRAT-certified technicians for rope-access work, and our crew trains through the year. One of our three partners is a U.S. military veteran. More than 1,100 Google reviews.
Our repairs and installations carry the Chimney Monkey Workmanship Warranty: 2 years on workmanship and materials, 3 years on venting and appliance systems, 12 years on structural masonry and liner installations — one step past the 1-2-10 residential standard, kept in force by an annual inspection.
Gurnee Chimney Questions
How much does a chimney sweep cost in Gurnee?
As of November 2026, a chimney sweep in Gurnee is $335 to $350 and includes the Level 1 inspection, for factory-built wood-burning fireplaces as well as masonry ones. An inspection on its own is to 05 to $300. A Level 2 inspection with video of the flue is around $300.
The company that made our 1990s fireplace is gone. Can it still be repaired?
Often, if listed replacement parts are still available for that model, and many brands were bought by other manufacturers who still support them. If the firebox or chimney cannot be repaired with listed parts, it should not be used, and replacement is the safe option. The inspection establishes which applies.
Does a factory-built wood fireplace need sweeping?
Yes. Creosote builds up in the metal chimney pipe just as it does in a masonry flue. A gas-only direct-vent fireplace does not need sweeping, but it does need an annual inspection and service.
Our chase cover is rusty. Is that urgent?
Surface rust is a warning. A cover that has rusted through or holds standing water is letting water into the chase, where it damages the framing and the top of the firebox out of sight. We recommend replacing it with a stainless cover shaped to shed water.
Do gas fireplaces need annual service?
Yes. A direct-vent fireplace should be checked once a year: burner and logs, pilot and ignition, the glass gasket, and the vent outside. Our NFI-certified technicians do this on the same visit as a sweep elsewhere in the house.
Do you charge for the inspection?
Yes. You are paying for a documented answer: photographs, video of the flue where conditions allow, and a written explanation of what needs correcting now and what can wait. The report is yours whether or not we do the repair.
Our Prices
Typical rates as of November 2026. A chimney sweep in Gurnee is $335 to $350 with the Level 1 inspection included, for factory-built wood-burning fireplaces as well as masonry ones. An inspection on its own is $205 to $300, and the same rate covers a utility chimney serving a furnace or water heater. A Level 2 inspection with video of the flue is around $300. Crown replacement on a masonry chimney typically runs $850 to $2,600, depending on its size. Chase covers, refractory panels, gas fireplace service and liners are quoted in writing after the inspection, because the right part depends on the make and model and pricing an unknown condition is guessing. The full list is on our chimney service costs page. Call 847-994-4388 to book or to confirm current pricing.







