Project RecapNorthbrook, ILCompleted July 2026

Chimney Shoulder Repair and Crown Rebuild in Northbrook

Last updated: · By the Chimney Monkey team

This chimney shoulder repair in Northbrook was part of a broader exterior masonry project that combined five different repairs. Chimney Monkey repaired and resealed the chimney shoulders, completed two crown replacements, partially rebuilt damaged masonry, tuckpointed the brick and washed and waterproofed the chimney. We are an NCSG member company with NFI-certified technicians, a 4.9-star Google rating and more than 1,100 reviews.

Short answer

In July 2026, Chimney Monkey completed an exterior masonry project in Northbrook, IL. The work included chimney shoulder repair and resealing, two documented crown-replacement scopes, a partial rebuild, tuckpointing and a wash with waterproofing. Each repair addressed a different part of how the chimney handles water.

2shoulder repair units
2crown-replacement scopes
1partial rebuild
5types of masonry repair

What did this Northbrook chimney project include?

The project combined five types of exterior masonry repair, with shoulder repair as the feature that sets it apart.

Structure and top

  • ✓ Two full crown rebuilds (extra-small)
  • ✓ Partial chimney rebuild

Masonry and water

  • ✓ Chimney shoulder repair and reseal (2 units)
  • ✓ Tuckpointing
  • ✓ Chimney wash and waterproofing

The invoice lists two separate crown-replacement scopes, and the job photos show work on more than one chimney top. In addition, the shoulder repair appears as two units, so the crew addressed shoulder areas in more than one place.

How do partial rebuilds, tuckpointing, shoulder repair, crown replacement and waterproofing differ?

Each of these repairs fixes a different part of the chimney, so a project can need several at once.

RepairWhat it fixesWhen it fits
Partial rebuildRemoves and rebuilds a damaged section of the chimneyBrick in one area is too damaged to repair in place
TuckpointingRenews worn mortar jointsThe brick is sound, but the joints are eroding
Shoulder repair and resealReshapes and reseals the sloped ledge where a chimney narrowsWater is not running cleanly off the shoulder
Crown replacementReplaces the concrete slab at the top of the chimneyThe crown is cracked or worn across its surface
WaterproofingLimits how much water the brick and mortar absorbSound masonry needs protection from moisture

For example, waterproofing does not repair failed mortar, and tuckpointing does not replace a cracked crown. That is why this project paired the repairs instead of choosing just one.

Why was part of the chimney rebuilt?

Chimney above the roofline with damaged brick removed during a partial rebuild
During: damaged brick removed for the partial rebuild.

A partial rebuild removes the affected portion of the chimney and rebuilds it from the roofline up as needed.

On this project, the crew took out the damaged masonry and rebuilt that section using standard masonry practices. They reused existing brick where it was suitable. Where new brick was needed, they matched the brick and mortar as closely as possible.

The rebuilt section ties back into the existing chimney, so the structure stays continuous. Our chimney rebuilding page explains how partial and full rebuilds compare.

What did the two crown replacements involve?

Each crown replacement removed the existing crown and built a new concrete crown sized for an extra-small masonry chimney.

A partial rebuild calls for a new crown, so the rebuilt section and the crown work go together. This photo shows the finished result, with new brick below a new crown. Every new crown has a proper slope, an expansion joint around the flue tile and an overhanging drip edge.

Rebuilt brick chimney with a new concrete crown and a mesh-sided cap
After: the rebuilt chimney with its new crown.

The second crown scope followed the same process. Crown work is weather-dependent, because new concrete needs time to cure properly.

Brick chimney with a new concrete crown and a round stainless chimney cap
After: a finished chimney with its new crown.

Here, a second chimney top shows a finished crown with its overhanging edge.

The drip edge pushes water past the brick face, so less of it runs down the chimney walls. As a result, the masonry below stays drier. Learn more on our chimney crown repair and replacement page.

What is a chimney shoulder, and why repair it?

A chimney shoulder is the sloped ledge where a wider part of the chimney steps inward to a narrower part.

Because it faces the sky, the shoulder catches rain on its way down the chimney. The crew repaired and reshaped the shoulders to promote proper water runoff away from the brick. Where needed, they rebuilt the shoulder contour, then resealed the area.

Shoulder repair is an add-on during an existing visit rather than a standalone service. On this project, the invoice lists it as two units.

Repaired and resealed chimney shoulder cap where a wide chimney steps inward
After: a repaired and resealed chimney shoulder.

Why tuckpoint and waterproof the chimney?

Tuckpointed brick chimney with renewed mortar joints, seen from the roof
After: tuckpointed brick on the chimney.

Tuckpointing renews worn mortar joints, and waterproofing then helps protect the masonry from water.

First, the crew removed deteriorated or loose mortar as needed. Next, they installed new mortar to restore proper joint depth and blended it with the existing brick. See our tuckpointing page for more.

Afterward, the crew washed the chimney and applied a vapor-permeable waterproofing treatment. It limits water absorption while still letting moisture vapor escape. Learn more on our chimney waterproofing page.

Note: washing reduces buildup and growth, but it cannot promise to remove every stain. Waterproofing is also required for warranty coverage on tuckpointing and partial rebuilds.

Why does this project matter for Northbrook homes?

Chimney Monkey serves Northbrook from our base in Buffalo Grove, along with Chicago, the North Shore and the northwest suburbs.

Many homes have chimneys with shoulders, and those ledges are easy to overlook from the ground. Therefore, we check the shoulder along with the crown, brick and mortar during exterior work. If you are not sure what your chimney needs, a chimney inspection is a good first step. Our masonry repair team can then plan the right mix of repairs.

Signs your chimney masonry may need attention

  • Cracks or broken edges on a shoulder cap
  • Loose, spalling or missing brick near the top
  • A cracked or crumbling crown
  • Mortar joints that look recessed or sandy
  • Water stains on brick below the shoulder

Chimney shoulder and crown FAQs

What is a chimney shoulder?

A chimney shoulder is the sloped masonry ledge where a wider part of the chimney steps inward to a narrower part. It usually has a sloped cap that sheds water. This Northbrook project included shoulder repair and resealing, listed as two units on the invoice.

What does shoulder repair and reseal include?

The crew repairs and reshapes the shoulder so water runs off and away from the brick. Where needed, they rebuild the shoulder contour, then reseal the area. It is an add-on during an existing visit rather than a standalone service.

What is the difference between a partial rebuild and tuckpointing?

A partial rebuild removes and rebuilds a damaged section of the chimney, often from the roofline up. In contrast, tuckpointing keeps the brick in place and renews only the mortar joints. This project included both, in different areas.

Why does a partial rebuild need a new crown?

The crown sits on top of the masonry, so rebuilding the upper chimney means building a new crown as well. On this project, the partial rebuild and the crown replacements were part of the same scope of work.

Does this project mean the home has two chimneys?

The invoice documents two separate crown-replacement scopes, and the photos show work on more than one chimney top. We describe it as two crown-replacement scopes to stay accurate to the job record.

Does waterproofing repair worn mortar?

No. Waterproofing limits water absorption, but it does not repair failed mortar. Worn joints need tuckpointing first. On this project, the crew tuckpointed the brick before washing and waterproofing the chimney.

What makes a new chimney crown last?

A lasting crown has a proper slope, an expansion joint around the flue tile and an overhanging drip edge. Together, those features move water off the top and away from the brick. Both crown scopes on this project used that design.

Can chimney crown work be done in any weather?

No. New concrete needs suitable weather to cure properly, so crown work is weather-dependent. Rain or freezing temperatures can delay it. For that reason, crown rebuilds are scheduled around the forecast.

Standards referenced

  • NFPA 211, Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances (National Fire Protection Association): annual chimney inspection, with cleaning when the inspection shows it is needed.
  • Manufacturer documentation for the vapor-permeable masonry water repellent.

Not sure what service your home needs? Start with a professional evaluation so the system can be identified, the visible conditions can be documented, and the right next step can be recommended.

Have a question about your chimney, fireplace, venting system, gutters, or dryer vent? Schedule a professional visit and get clear recommendations based on the actual condition of your home.

📞 Call (847) 994-4388 Schedule a Service Visit

Categories: Chimney Care Chimney Exterior Services Cook County Illinois Local Services Masonry Chimney Repair Northbrook

Tags: , , , , , ,

VISIT DISPLAY ROOM BOOK ONLINE NOW

Don’t take our word for it. Ask an AI.

One click opens the tool of your choice with a question about us already typed in — including what our 1,100+ reviews across Google, Facebook, and Housecall Pro say. We’re comfortable with what comes back.

ChatGPTClaudePerplexityGeminiGrok